Korg Car Video System D1600MKII User Manual

EasyStart  
D1600mkII Main Features  
Intuitive TouchView Interface  
No Audio Compression  
24 channel, 8 buss digital mixer  
16 track recorder, with a total of 128 virtual tracks  
Hi, Lo and adjustable mid frequency EQ for every channel  
Up to 11 simultaneous effects per song: 8 inserts, 2 masters and a final effect. Includes REMS mic, amp  
and cabinet effects plus 98 effect chains and hundreds of programs  
Internal/External Mix Automation with 100 Scenes per song  
Extensive digital editing of songs and tracks  
Up to 99 levels of UNDO  
Built-in tuner, metronome and hundreds of PCM rhythm patterns  
Internal 40 GB IDE hard disk  
USB Connectivity for file transfer  
Internal CDRW 16X CD burner for mastering and backup  
New Disk At Once feature lets you arrange your songs and burn them to CD in a single pass  
EasyStart CONTENTS  
A quick overview of modes  
Creating a new song  
2
3
3
3
4
4
4
5
5
5
5
5
Assigning inputs and recording audio tracks  
Listening to recorded tracks  
Working with EQ  
Using the Insert effects  
Using the Master effects  
Applying a Final effect  
Working with Scenes  
Editing tracks  
Writing/Burning to CDR/CDRW  
Additional D1600mkII Resources  
 
D1600mkII EasyStart  
Creating a new song  
1. After installing the internal hard drive (following the included instructions), connect the AC power cable and press the  
[MAIN] power key on the rear panel Ä press the [POWER] key (red) on the top panel  
2. Press the [SONG/CD] key, and then press the “SelSong” tab in the display.  
3. Press the “New” button in the display Ä select the “Song Type” as “16Bit/16Track” and the “Mixer Set” as “New” Ä  
press “OK”. The display will indicate “NEW SONG” in the next available empty song location.  
!
You can rename your song by pressing the “Rename” button in the display.  
The Transport Keys:  
[ ] = RECORD  
[] = PLAY  
[] = STOP [] = REWIND [] = FAST FORWARD  
Assigning inputs and recording audio tracks  
4. Press the [INPUT/TUNER] key.  
5. Connect your audio source(s) (mic, keyboard, guitar, etc.) to one (or more) of the eight analog inputs on the rear of the  
D1600mkII. If you are connecting a guitar to the D1600mkII directly, use the GUITAR IN jack on the front panel.  
6. In the display, select which track each input will be recorded onto by pressing the icon that looks like a ¼” phone jack and  
using the DIAL to set the input (Note: if using the GUITAR IN jack, you will need to dial-in “8” as the input source for the  
desired record track, or simply use track 8, default assigned to input 8, as the record track for guitar).  
7. Press the green [TRACK SELECT] keys for each of the tracks that you assigned in the previous step, so that they  
change to orange.  
8. Press the [METER/ TRACK VIEW] key, then press the popup button in the upper left of the display Ä Select  
“PreFdr” from the list and press “OK” ÄNow you can play your audio sources and adjust the levels so that they do not  
clip (“CLP” line in display).  
9. To enable recording on those tracks, press the orange keys one more time to change them to red, and press [ ] to put  
the D1600mkII in record standby mode.  
10. To start recording, press []. To stop recording, press [].  
Listening to the recorded tracks  
11. To return to the beginning of the song, press and hold [] and then press [] once.  
12. Press to set each of the track status keys to green for each track you want to listen to, by pressing them twice.  
13. Press [] and set your levels with the track faders and master fader.  
Working with EQ on playback  
1. Press the [EQ/PHASE] key.  
2. Using the four way CURSOR keys [ꢁꢀꢅꢆ] and the DIAL, select the “knob” in the display for the EQ parameter that  
you would like to adjust for a specific track. The upper left hand side of the display will show the parameter and track you  
will be working with. (To change EQ settings for tracks 5-8, 9-12 and 13-16 press the tabs on the bottom of the display)  
3
 
D1600mkII EasyStart  
Using the Insert Effects  
1. Press the [INSERT EFFECT] key, and then press the popup button in the display to the right of “Assign”.  
2. To assign an insert effect to a recorded track, select “PlayTrack” by pressing the “radio button” to the left of “PlayTrack”,  
and then press “OK”. (Note: To assign an insert effect to an audio source before recording it to a track, select “Input” by  
pressing the radio button to the left of “Input” and then press “OK”)  
3. To select the type of insert effect(s) you will be using, press the popup button to the left of “1 in 1 outx4”, and then  
press “OK”. (For more information on insert effect types refer to the Owners Manual pg. 105).  
4. To select the track where the insert effect is going to be applied, press the popup button in the display below  
“InsertTo:”. Using the CURSOR keys and the DIAL, select the assign channel and destination, and then press “OK”.  
5. To select an insert effect, press the “insert effect” tab for the effect that you want to change (ex. “InsEff1” for Insert Effect  
1) and use the DIAL to select and effect.  
6. To edit a selected effect’s parameters, press the “effect name” button in the display (ex. MM2:P4EQ-Wah ) and then  
press the “icon” in the display to access the edit parameters.  
Using the Master effects  
1. Press the [MASTER EFFECT / AUX] key , and rotate the DIAL to select an effect for Master Effect 1 (“MstEff1”).  
2. Press the “MstEff2” tab and use the DIAL to select an effect for Master Effect 2.  
3. To edit the parameter for either effect, press the “effect name button” in the display (ex. RV1:ReverbHall ) and then  
press the “icon” in the display to access edit parameters.  
4. To apply master effects to a track, press the “EffSnd1” tab (for Master Effect 1) or “EffSnd2” tab (for Master Effect 2) in  
the display Ä Use the CURSOR keys and DIAL to increase the send level for each track you want to add master effects  
to.  
Applying a Final Effect  
1. Press the [MASTER EFFECT/AUX] key Ä Press the “FinalEff” tab.  
2. Rotate the DIAL to select a Final Effect. To edit any parameters of the Final Effect, press the “effect name button” in the  
display (ex. DY1:St.Comp ) and then press the “icon” in the display to access the edit parameters.  
Working with Scenes  
1. Press the [SCENE] key to enter Scene mode. If you have not stored any Scene memory locations yet, press the  
[STORE] key and then press the [SCENE] key. This will store a “snapshot” of your mixer settings for this song at the  
COUNTER location indicated on the SONG/ CD page.  
2. After pressing the [SCENE] key, to enable Scene Memory, press SceneRead:Off in the display so that it reads  
SceneRead:On.  
3. To store additional scenes, start song playback and change mixer settings, then press the [STORE] key, followed by  
pressing the [SCENE] key again. Each time you do this, a new scene will be created and stored in the Scene Memory.  
4. You can also get a visual picture of what each Scene looks like, and edit its parameters, by pressing the “MixView” tab  
in the display and using the TRACK Faders and PAN knobs to adjust values. The changes yo9u make will be indicated  
in the display.  
!
You can reset a Scene’s Fader and Pan settings by moving each fader and pan knob until the display indicates two  
“arrows” versus a single directional arrow.  
4
 
D1600mkII EasyStart  
Selecting Virtual Tracks and Editing tracks  
1. Press the [TRACK] key.  
2. Using the CURSOR ꢁꢀ keys and the DIAL, select which virtual track you will be listening to or recording to. To adjust  
Virtual Track settings for tracks 9-16, press the “Vtr9-16” tab in the display. For more info on Virtual tracks refer to the  
Owner’s Manual pgs. 27, 81.  
3. To use the “EditTrk” function, you must first select a range of the song to be edited by storing an IN, OUT and TO  
location (some editing functions also require an END location). To do this, move to the desired song location, and then  
press the [STORE] key followed by the LOCATE key for each location. Once you’ve set locate points, you can edit the  
specific region in the track(s).  
4. To see the list of edit functions, press the button next to “CopyTrack” in the display. To select a function, press the  
”radio button” to the left of the function you wish to perform and then press “OK”.  
5. To execute the function, press Exec. in the display. For more information on editing tracks, refer to the Owner’s Manual  
pgs. 81-87.  
Writing/Burning to CDR/CDRW  
1. Once you have finished a song and performed a mixdown to two tracks (refer to Owner’s Manual pgs. 29-31:Combining  
multiple tracks into two: Bounce), press the [SONG / CD ] key and then press the “CDR/RW” tab.  
2. Insert a blank CDR or CDRW disc into the CDR/RW drive and press WriteToCD in the display.  
3. Select “16x” as the write speed, and press “YES” next to “AreYouSure?”  
Additional D1600mkII Resources  
You can download a more in-depth “D1600 Guided Tour” and additional “tips and tricks” from www.korg.com. There are also many  
important references to modes and applications in the D1600mkII Owner’s Manual. Some of these references are listed below:  
Installing hard disks and CD-R/RW drives  
CD Mastering  
134  
49 / 91  
73 / 76  
63 / 96  
41 / 74  
77  
D1600mkII MIDI sync procedures  
Recording MIDI clock from an external sequencer  
Using MIDI to control Scenes  
MIDI Machine Control (MMC)  
Working with WAV files and the Import/Export function  
Initializing/formatting internal or external hard drive  
Backing up and restoring data  
86  
67 / 79  
66 / 77  
67  
Connecting external drives  
Updating system software  
139  
Troubleshooting  
127  
5
 

Indesit Dishwasher idl710 User Manual
Indesit Washer Dryer WIDL 146 User Manual
Init Portable Media Storage PR MS10265 User Manual
Inova Staple Gun BT125 User Manual
JetAudio Portable Multimedia Player CW200 User Manual
JVC DVD VCR Combo HR XV45SEU User Manual
Kenwood Portable CD Player CD 4260M User Manual
KitchenAid Dishwasher W10216167A User Manual
KitchenAid Refrigerator W10162434A User Manual
Kramer Electronics Fan PT 5T User Manual