EasyStart
Main Features
•
4-track digital recorder featuring
two-track simultaneous recording,
with 8 virtual tracks per track for a
total of 32 tracks!
•
Easy and intuitive knob-based user
interface allows instant access to
effects, rhythm patterns, virtual
tracks and digital editing with
dedicated knobs.
•
•
High capacity Compact Flash™
data storage provides a stable and
quiet recording medium with
plenty of recording time! Compact
Flash cards of up to 2 GB can be
used!!
Built in USB connectivity allows
you to easily-transfer data to your
computer for backup, playback and
editing.
•
•
XLR and ¼ inch inputs
accommodate microphone, guitar,
keyboards, etc.
Korg’s REMS modeling, technology
delivers 93 effect types that can
be used for guitar, insert, master
or final effect processing. 100
preset effect programs and 100
user programs.
•
•
Favorite knob for instant recall of frequently used preset
and custom effects settings.
A full suite of non-destructive editing tools including
copy/paste, punch in/out, as well as time
compression/expansion and more!
•
Effects include accurate amp,
cabinet and microphone modeling
simulations, as well as a large
variety of multi-effects including
reverb, delay, pitch-shift, chorus,
tremolo, flanger, phaser and more!
•
87 built-in rhythm/metronome patterns and chromatic
tuner are built-in.
•
•
Full-range internal condenser microphone!
Includes 64MB Compact Flash card and AC adaptor
EasyStart CONTENTS
Getting Started:
Installing the included Compact Flash™ card
Connections; Listening to the Demo Songs
The Mode Knob; Recording Basics
Using the Rhythm Patterns
2
2
3
3
Working with the Effects
4
Virtual Tracks; The Favorite Knob
5-6
6
Creating a two-track MP2 for playback on your computer
Backing up your songs to computer; More information on Compact Flash
7-8
KORG D4 EasyStart
Transport Control Tips:
•
During playback, pressing the ◄◄ rewind key once resets the song back to the beginning (will also
return song to the beginning when playback is stopped).
•
•
•
Holding down ◄◄ “rewinds” the song and will playback in reverse at double speed.
Holding down ►► “fast-forwards” or plays back the song at double speed.
During playback you can press and hold the ► play key to play back at half speed.
The Mode Knob
The MODE Knob makes it easy to access the D4’s eleven different modes of operation, listed below:
LOCATE
NEW SONG
REC MODE
V-TRK
SONG SEL
CARD
SONG EDIT
USB
SYSTEM
RHYTHM
TRK EDIT
To select Modes, just rotate the MODE knob!
There are also four “sub modes”:
Effect
Effect Write
Tuner
Punch-Rec
After you’ve finished this guide, you can find more information on each MODE in the D4 owner’s manual,
beginning on page 24.
Recording Basics
Create a new song:
1. Set the MODE knob to “New Song”. The display will indicate the song grade (“SngGrade”) and “Std” will
be flashing > Now use the VALUE dial to select the desired song grade. For this exercise, select “Std”
grade. (Song grade information is below)
2. After choosing the song grade, press the ► CURSOR key on the right (flashing). The display will briefly
indicate “WORKING”, and then “New Song”. That’s it - you’re almost ready to record!
!
To rename songs, see page 29 of the owner’s manual, but for now, leave the song name set to “New Song”…
3
KORG D4 EasyStart
Information on Song Grade selection (based on the included 64MB card):
•
•
•
Eco: Economy, extended-length recording (Max. time, 64MB, 1 Track: 132 minutes)
STD: Standard, very high quality, normal use (Max. time, 64MB, 1 Track: 64 minutes)
HiQ: High audio quality (Max. time, 64MB, 1 Track: 44 minutes)
Set up the Rhythm and Tempo for your new song:
1. Set the MODE knob to “RHYTHM”. The name of the currently selected rhythm pattern will be displayed.
2. Use the VALUE dial to select a pattern. Note: If the display indicates “off”, rotate the VALUE DIAL to the
right, until you hear a drum pattern.
3. Press the ► CURSOR once, to display “Tempo”, and then use the VALUE dial to adjust the tempo. The
cursor will also take you to the beat (time signature) and “level” adjustment if needed.
!
!
The drums NEED NOT be recorded to the tracks, but instead are always synchronized to the recorder and to
your recorded tracks! This means you can audition new rhythm patterns whenever you like!
4. Press the EXIT key twice – the rhythm playback will stop.
For a list of rhythm patterns, available time signatures, and recording count-in options, please refer to page 91
in the D4 owner’s manual.
The D4 Effects
The D4 provides four types of professional effects:
•
•
•
•
Guitar/Mic effects
Insert/ Guitar+Vocal effects
Master effects
Final effects
The effect types available can be selected by pressing the keys just to the left of the Track Faders.
The D4 includes 93 effect algorithms (including Korg’s amazing REMS sound modeling effects), with 100 preset/100 user
effect programs. If you select the effect type GUITAR (for recording on input - mono/1 track only) or INSERT (for
stereo instrument recording - stereo in/out, stereo track bouncing, etc.), you can apply effects as you record.
If you select MASTER as the effect type, you can send the signal from any track to an effect for overall processing. If
you select FINAL as the effect type, you can apply an effect to the master L/R bus, and use this effect as a mastering
processor for track bouncing and other track-related operations.
Using a Guitar to record…
Get ready to record:
1. Plug your guitar into INPUT 1 and set the INPUT 1 switch on the back panel to GUITAR.
4
KORG D4 EasyStart
Tune up:
2. Press the TRACK ASSIGN 1 and 2 keys simultaneously to enter Tuner mode > When finished tuning, press
the EXIT key to exit Tuner mode.
!
Entering Tuner mode bypasses the currently- assigned effect.
3. Press the TRACK ASSIGN 1 key- the key will light.
4. Track 1 is automatically selected as your recording destination. To arm a different track, press the PAN
knob above the desired track’s fader.
5. Press the GUITAR/MIC FX key (left of the faders) - the key will light.
6. Rotate the VALUE dial to select an effect program.
7. Press Exit to leave the effect sub-mode.
!
When using the Guitar/Mic effects, you can only select one track for recording.
Record your first track…
Set your levels and then record:
1. While you play, adjust the INPUT LEVEL 1 knob above the TRACK ASSIGN keys. Set this knob so that you
achieve a fairly hot level without the INPUT 1 LED lighting.
2. Adjust the FADER for the previously selected destination TRACK to achieve a fairly hot level without reaching
the “CLIP” (distortion) level in the LCD display.
3. Press the ● record key - it will blink, and you’ll hear the previously selected rhythm pattern - you are now in
record-standby mode > Play your instrument to rehearse, and then…
4. Press the ► play key to record and press the ■ key when you are finished recording.
5. Press the PAN knob to disarm the record track, and then press the << key once, to go to the song beginning.
6.
Press the ► play key and listen to your results > Press the ■ key to stop playback.
Recording a stereo source such as a keyboard:
1. Set the INPUT 1 and 2 switches both to LINE, and connect your keyboard to INPUT 1 and 2.
2. Press the TRACK ASSIGN 1 key; track 1 is automatically elected as your recording destination (if you wish to
record on track 3 and 4, press the PAN knob above the TRACK 3 fader).
3. Press the TRACK ASSIGN 2 key; track 2 is automatically selected as your recording destination (unless track 3
was selected in the previous step, then track 4 will automatically be armed).
4. Press the INSERT/GTR+VO key. The key will light > Now use the VALUE dial to choose an effect program and
press Exit to leave the effect sub-mode.
5. While playing, adjust the INPUT LEVEL 1 knob above the TRACK ASSIGN keys. Set this knob so that you
achieve a fairly hot level without the INPUT 1 LED lighting. Repeat process for INPUT LEVEL 2.
6. Adjust the FADERS for the previously selected destination tracks (1 /2 or 3/4) to achieve a fairly hot level
without reaching the “CLIP” (distortion) level in the LCD display.
7. Follow steps 3-4 in the previous section to record and playback the song, disarming both tracks for playback by
pressing the respective PAN knobs.
Virtual Tracks
There are 32 Virtual tracks available for recording on the D4. Each of the four tracks contains eight Virtual tracks,
allowing you to record multiple takes, and then choose your favorite take from the Virtual tracks. For more information
on how to use Virtual tracks, see the D4 owner’s manual, pages 30-31.
5
KORG D4 EasyStart
A recap of basic recording:
1. Choose an input and plug in your instrument or microphone, or use the internal mic.
2. Choose the desired input type (GTR, MIC- EXT or INT or LINE).
3. Press the appropriate TRACK ASSIGN key (1 or 2).
4. Track 1 is automatically selected as your recording destination. To arm a different track, press the PAN knob
above the desired track’s fader.
5. Adjust trim level above track assign button, and then adjust fader level.
6. If you want to record with an effect, choose either GUITAR/MIC for mono or INSERT/GTR+VO for stereo.
7. Use the VALUE dial to choose an effect; then press Exit.
8. Make sure your Input and Fader levels aren’t clipping!!
9. Press the ● record key followed by the ► play key, and record!!
!
For information on how to Mixdown your multitrack recordings to DAT, MD or other sources, see the D4 owner’s
manual, page 51,
Using the Favorite knob
The PRE/FAVE (Favorite) knob gives you instant access to effect programs at any time.
The D4 comes shipped from the factory with 11 effects printed on the top panel and registered to the Favorite knob. You
can easily change this and store your own effects.
Registering effects to the Favorite knob:
1. Choose an effect program by pressing the appropriate FX key (i.e. GUITAR/MIC, INSERT/GTR+VO, MASTER,
FINAL); then scroll through the programs with the Value dial.
2. Press the WRITE - KNOB key (below the PRE/FAVE knob). The display will indicate “knobPosi.”
3. Use the VALUE dial to select the PRE/FAVE KNOB position where you want to register the effect (1-11), and
then press the CURSOR ► key. The display will then indicate “Write OK?”
4. Press the CURSOR ► key again, and the display will indicate “Finish!” The effect will now be registered to this
PRE/FAVE KNOB position for instant recall!
Selecting effects with the Favorite knob:
1. Rotate the PRE/FAVE knob to select the desired effect.
2. To bypass the currently selected effect program, press the illuminated FX key (GUITAR/MIC, INSERT, BTR+VO,
MASTER or FINAL).
3. To turn the effect off, press and hold the illuminated FX key.
Creating a 2-track (Stereo) MP2 conversion for transfer and playback on your
computer
You’ll need to have standard media software installed on your computer to go through the following section. If you do
not have the required software, you can download it from www.microsoft.com (Windows Media Player) or
(QuickTime Player). Playback of D4 transferred audio currently works with Windows ME 2000 or later, and Mac
OS 9.4 or later.
6
KORG D4 EasyStart
In order for you to playback D4 songs on your computer, you’ll need to convert the D4 song data to a stereo MP2 format
file first:
1. Choose the song you wish to covert; select SONG SEL with the MODE knob, choose the song with the VALUE
dial and then press the CURSOR ► key (make sure the song is set to play from the song beginning).
2. Set the MODE knob to “REC MODE”.
3. Use the VALUE dial to select “ConvrtMP2”.
4. Press the EXIT key to return to play mode.
5. Press the TRACK 1 PAN knob; both track 1 and 2 record select LED’s will light.
6. Begin playback of the song and adjust the panning for each track as needed, as well as the TRACK and
MASTER faders. Make sure that the track and master (left and right) levels are not clipping.
7. Reset to the beginning of the song once you are satisfied with the playback levels.
!
If the rhythm guide is on, the rhythm playback will also be recorded in the next step. If you don’t want the
rhythm to record, press the AMB/RHYTHM knob to turn the rhythm off.
8. Begin recording: Press the ● key and the ► key, and when the song has finished playing back, press the ■
key.
9. A new song (sharing the same title) will now be created in stereo MPEG audio layer 2 format.
Backing up your songs to a computer:
1. Connect a USB cable (not included) between the D4’s rear panel USB port and your computer’s USB port (PC
or Mac).
2. Use the MODE Knob to select USB.
3. When the display indicates “Ready?”, select “Yes” with the VALUE dial, and then press the CURSOR ► key
(the display will then read “CrdReady”).
On a Windows-based system: A drive named “Removable Disk” is added under ‘My Computer’.
On a Mac-based system: A drive named “Unnamed” is added to the desktop.
When you open the removable drive that was added to your computer, you will see the contents of the card that is
inserted in the D4.
(Make sure to leave the song folders intact whenever you backup or restore data. Do not open the folders and try to
transfer files from within, as the entire folder needs to be transferred.)
You can now copy the desired song/effect data to your computer. D4 song data from your computer can also be written
to the card.
After copying, you can launch your media player software and playback your song, email it - even burn a CD from it!
To disconnect from your Windows PC: Select the card icon on the computer’s taskbar > Once you’ve selected to
safely remove the hardware/drive, you will be prompted: “It is safe to disconnect the USB mass storage device” > press
the D4’s CURSOR ► key > When the display indicates “Complete” select YES with the VALUE dial and then press the
CURSOR ► key > you can now unplug the USB cable.
For Macintosh computers: Drag the “Unnamed Drive” into the Trash, or select and highlight the drive on the desktop,
and then select “Eject” from the “Special” menu > Make sure the D4 display changes from “CardLock” to “CdNotRdy”,
and then press the D4’s CURSOR ► key > When the display indicates “Complete”, select “YES” with the VALUE dial and
press the CURSOR ► key > you can now unplug the USB cable
7
KORG D4 EasyStart
More information on using Compact Flash…
Deleting a song from the Compact Flash card:
1. Select SONG SEL with the MODE knob, choose the song with the VALUE dial and then press the CURSOR ►
key.
2. Set the MODE knob to SONG EDIT.
3. Select the delete operation by rotating the VALUE dial to ”Delsong”, and then press the CURSOR ► key. The
display will now indicate “DestSong”.
4. Press the CURSOR ► key. The display will indicate “Del OK?” and “YES” will be flashing - if not, use the VALUE
dial to select “Yes”.
5. Press the CURSOR ► key. The display will indicate “Sure”?> Use the VALUE dial to select “Yes”, and then
press the CURSOR ► key. The song will now be deleted from the card.
Formatting Compact Flash cards:
In order to use a Compact Flash card on the D4, it must be formatted on the D4 itself. Cards formatted on computer or
any device will not be recognized by the D4. See the D4 owner’s manual, page 55 for more information.
Be sure to read the D4 Owner’s Manual for more in-depth information, and
8
|