Korg Guitar AX3A User Manual

EasyStart  
AX3G  
AX3B  
AX3A  
¾ A great collection of  
accurately-crafted Guitar  
Amp/Cabinet modeling and  
Effects using Korg’s award-  
winning “REMS” modeling  
technology.  
¾ For the Electric Bass:  
Superbly crafted Amp,  
Cabinet and Effects using  
Korg’s REMS modeling  
technology.  
¾ Multi-effect processor for  
Electric Acoustic Guitar  
providing essential high  
quality effects.  
¾ Korg’s “REMS” modeling  
technology accurately  
reproduces the rich, subtle  
sound of other acoustic  
guitars; Nylon, Reso, M  
Small, G Large, T Large &  
more.  
¾ 16 of the most coveted  
Drive/Amp models, mix and  
match with 10 killer  
cabinets.  
¾ 16 of the most coveted  
Drive/Amp models; mix  
and match with 10 killer  
cabinets.  
¾ 30 effects including 10 Pre-  
FX: Comp, Wah, Fretless  
and Synth. 10 Modulation,  
Filter and Pitch effects. 10  
Delay/Reverb effects plus a  
professional noise reduction  
effect.  
¾ 30 effects divided into 3 FX  
blocks w/ an adjustable  
professional noise reduction  
effect. 10 Pre FX: Comp,  
Wah, Acoustic, Drone, P/U  
and more. 10 Modulation,  
Filter and Pitch effects. 10  
Delay/Reverb effects.  
¾ Choose from 9 acoustic  
body models or a Mic effect  
that emulates the timbre of  
your guitar being run  
through a condenser  
microphone.  
¾ 80 Programs: 40 presets  
and 40 user  
¾ 33 effects including 10 Pre  
FX such as Compressor,  
Limiter, Exciter and Drone.  
A Tone network with Mid  
Frequency adjustment, a  
Notch Filter, 10 Modulation,  
Filter and Pitch effects. 10  
Delay/Reverb types and a  
Noise Reduction effect.  
¾ 80 Programs: 40 presets  
and 40 user  
¾ A total of 6 simultaneous  
FX (3 effects blocks, Noise  
Reduction, Drive/Amp and  
Cabinet modeling).  
¾ A total of 6 simultaneous  
FX (3 effects blocks, Noise  
Reduction, Drive/Amp and  
Cabinet modeling).  
¾ Intuitive interface for quick  
and easy operation.  
¾ Intuitive interface for quick  
¾ 43 total effect types, 7 FX  
and easy operation.  
¾ Function and Value knobs  
allow easy access to effect  
parameters and other  
features.  
can be used simultaneously  
¾ Delay and Reverb Effects  
carry over when changing  
between programs with the  
same settings.  
¾ 80 Programs: 40 presets  
and 40 user  
¾ Program select foot  
switches with large LED  
indicators for visibility.  
¾ Auto-chromatic tuner  
w/mute function  
¾ Program select foot  
switches with large LED  
indicators for excellent  
visibility.  
¾ Intuitive interface for quick  
¾ External expression pedal  
and easy operation  
jack; volume/wah  
¾ Battery or AC-powered  
¾ External expression pedal  
¾ Battery or AC-powered  
jack; volume/wah  
¾ External expression pedal  
¾ Auto-chromatic tuner  
jack; volume/wah  
¾ Built in auto-chromatic  
w/mute function  
tuner w/mute function  
¾ Auto-chromatic tuner  
¾ Output jack also powers  
w/mute function  
¾ Battery or AC-powered  
headphones  
 
AX3-Series EasyStart  
Note:  
Tip:  
A list of effect parameters can be found in the aforementioned effect chart in the rear of the  
manual. This will be very helpful in determining which parameter is being adjusted.  
The Original Value Indicator (small dot in the lower right corner of the Program/Value Display)  
can be used to indicate the saved effect/ parameter settings of the currently selected program.  
Simply put, when the Original Value Indicator is lit, the previously saved effect/parameter setting  
has been selected.  
Example (all AX3 models)  
1.  
2.  
Select MOD with the Function Knob.  
Use the Write (“UP”) & Cancel (“DOWN”) Buttons to select “F2” (CL Flange). Then use the Value Knob to adjust the CL Flange  
effect’s Main parameter (SPEED).  
3.  
Turn the Function Knob clockwise one position to PARAM. Use the Write (“UP”) & Cancel (“DOWN”) Buttons to select “P2”  
(DEPTH). Use the Value Knob to adjust the level of the DEPTH parameter.  
Note:  
In this mode, if you press the Program Up (Value) switch, the current parameter value will be  
displayed. If you press the Program Down (Type/Param) switch, it will display to the currently  
selected FX type/parameter.  
Saving a Program  
You’ve tweaked and turned some knobs, and you like the changes that you’ve made – now to save your program:  
1.  
Set the Function Knob to the “WRITE” position, and press WRITE (“UP”) Button. A User program number will blink in the  
Program/Value Display.  
2.  
3.  
Use the Program Up and Down Switches or Value Knob to select the destination program number (1 - 40)  
Press the WRITE (“UP”) Button once again, and your program will be stored in the specified location (“CP” will display briefly indicating  
the process is complete).  
Amp/Line Setting (AX3G only)  
The AX3G’s output may be optimized to suit specific monitoring sources via the Amp/Line setting. Amp/Line settings can be  
made under the P5 parameter of the Drive/Amp (Note; the amp line setting is only applicable to Amp models {i.e. A0, A1,  
A2, A3, etc.} and will not be found on Drive models {i.e. D0, D1, D2, D3, etc.}). Select “A1” if you connect the AX3’s output  
to the input of a clean-sounding open back combo. Select “A2” if you connect the AX3’s output to the input of an open back  
combo with stronger mid-range content. Select “A3” if you connect the AX3’s output into a sealed back cabinet such as an  
amp stack. Select “Ln” if you connect the AX3’s output into a line input such as a mixer, recorder, headphones or any other  
full range monitoring source.  
3
 

Ingersoll Rand Marine Safety Devices 1 1 2002 User Manual
Ingersoll Rand Stroller 66506 B User Manual
Invacare Car Seat Adjustable ASBA Seat User Manual
Jenn Air Refrigerator W10183787A User Manual
JVC Stereo System UX L36V User Manual
JVC VCR HR 5911U User Manual
Kenmore Water Heater 153330402 User Manual
KitchenAid Ice Maker KUIS18PNTB0 User Manual
KitchenAid Refrigerator KTRS21KL User Manual
Knoll Systems Stereo Amplifier GSZ44 User Manual