Korg Electronic Keyboard KLC M1 User Manual

External Setups  
E 1  
 
1: These operations will overwrite the previous MIDI Control settings. If necessary, back up the previous control Midi file.  
2: When the MIDI channel settings of the host application and the plug-in software are the same, proper control may not be available. Please change the MIDI channel setting on  
either the host application or the plug-in software. Please refer to the application’s manual for the correct setting  
Scene  
Variation  
Manufacturers  
Product Name  
Knob 1  
Knob 2  
Knob 3  
Knob 4  
HINT  
Name  
Ch  
Encoder 1  
Encoder 2  
Encoder 3  
Encoder 4  
7
[Encoder]  
Global Ch  
CC#28  
Global Ch  
CC#29  
Global Ch  
CC#30  
Global Ch  
CC#31  
Click the controller logo on the “PERFORMANCE” page. Select “Load Controller Map...”  
from the displayed controller menu. Load the controller setting file “LegacyCell.cmap”  
from the “Presets” folder that’s located inside the folder where the KORG Legacy Collec-  
tion is installed.  
CC#/Note  
Name  
Ch  
KLC LegacyCell  
Slider 1  
Slider 2  
Slider 3  
Slider 4  
8
[Slider]  
Global Ch  
CC#77  
Global Ch  
CC#15  
Global Ch  
CC#5  
Global Ch  
CC#20  
CC#/Note  
Name  
Ch  
XMOD INT  
Global Ch  
CC#12  
FREQ MOD  
Global Ch  
CC#13  
PWM INT  
Global Ch  
#CC15  
VCF Cut  
9
[A]  
Global Ch  
#CC74  
Click the “FILE” button at the bottom of the screen. Click the “LOAD” button in the dis-  
play and make the popup menu appear. Choose “Controller Map...” from the popup  
menu. Load the controller setting file “MonoPoly.cmap” from the “Presets” folder  
located inside the folder where the KORG Legacy Collection is installed.  
CC#/Note  
Name  
Ch  
KLC Mono/Poly  
VCF EG ATTACK  
Global Ch  
#CC28  
VCF EG DECAY  
Global Ch  
#CC29  
VCF EG SUSTAIN  
Global Ch  
#CC30  
VCF EG RELEASE  
Global Ch  
#CC31  
10  
11  
12  
13  
[B]  
CC#/Note  
Name  
Ch  
OSC 1 Wave  
Global Ch  
CC#77  
Filter Cutoff  
Global Ch  
CC#74  
Filter Resonance  
Global Ch  
CC#71  
Filter EG Int  
Global Ch  
CC#79  
KORG  
1: Connect the microSTATION’s MIDI OUT jack to the microKORG’s MIDI IN jack with a  
MIDI cable.  
2: Set the EDIT SELECT 2 knob to “MIDI. Move Knob 1 to set the MIDI CH to “1. Move  
Knob 3 to set the CLOCK to “Ext.  
3: Set the EDIT SELECT 2 knob to “GLOBAL”. Move Knob 4 to set the POSITION to “PrE”  
(Pre TG).  
4: Press the 4 key while holding the SHIFT key to enter MIDI Filter settings. Move Knob 1  
to select “P-E” (PROGRAM CHANGE Enabled). Move Knob 2 to select “C-E” (CONTROL  
CHANGE Enabled). Move Knob 3 to select “b-E” (PITCH BEND Enabled).  
[A]  
CC#/Note  
Name  
Ch  
microKORG  
OSC 1 Control2  
Global Ch  
CC#15  
OSC 2 Tune  
Global Ch  
CC#19  
OSC 1 Level  
Global Ch  
CC#20  
OSC 2 Level  
Global Ch  
CC#21  
[B]  
CC#/Note  
Name  
Ch  
Filter1 Balance  
Global Ch  
CC#27  
Filter1 Cutoff  
Global Ch  
CC#74  
Filter1 Resonance  
Global Ch  
CC#71  
Drive/WS Depth  
Global Ch  
CC#83  
1: Connect the microSTATION’s MIDI OUT jack to the microKORG XL’s MIDI IN jack with a  
MIDI cable.  
2: Set the KNOB FUNCTION SELECT dial to “FULL EDIT.  
3: Move Knob 1 to set the page to “MIDI.Move Knob 2 to set the parameter to “MIDI  
CH.” Move Knob 3 to set the value to “01. Move Knob 2 to set the parameter to  
CLOCK” Move Knob 3 to set the value to “EXT MIDI.”  
4: Move Knob 1 to set the page to “GLOBAL.Move Knob 2 to set the parameter to  
“POSITION ” Move Knob 3 to set the value to “PRE TG.”  
[A]  
CC#/Note  
Name  
Ch  
EG2(AmpEG) Attack  
Global Ch  
EG2(AmpEG) Release  
Global Ch  
MFX1 We/Dry  
Global Ch  
MFX2 We/Dry  
Global Ch  
microKORG XL  
5: Move Knob 1 to set the page to “MIDI FLT.” Move Knob 2 to set the parameter to  
“PROG CHG ” Move Knob 3 to set the value to “ENABLE.” Move Knob 2 to set the  
parameter to “CTRL CHG ” Move Knob 3 to set the value to “ENABLE.” Move Knob 2 to  
set the parameter to “P.BEND CHG ” Move Knob 3 to set the value to “ENABLE.”  
14  
[B]  
CC#/Note  
CC#73  
CC#72  
CC#115  
CC#116  
3
 
1: These operations will overwrite the previous MIDI Control settings. If necessary, back up the previous control Midi file.  
2: When the MIDI channel settings of the host application and the plug-in software are the same, proper control may not be available. Please change the MIDI channel setting on  
either the host application or the plug-in software. Please refer to the application’s manual for the correct setting  
Scene  
Variation  
Manufacturers  
Product Name  
Knob 1  
Knob 2  
Knob 3  
Knob 4  
HINT  
Name  
Ch  
OSC1 Wave  
Filter 1 Cut  
Filter 1 Resonance  
Global Ch  
CC#71  
Filter 1 Balance  
Global Ch  
CC#27  
1: Connect the microSTATION’s MIDI OUT jack to the RADIAS’ MIDI IN jack with a MIDI  
cable.  
2: Press the [GLOBAL] key to enter Global mode. Set “Position” on the “GLOBALpage to  
“Pre TG.  
3: Press the [PAGE] key to move to the “MIDI” page. Set “MIDI Ch” to “01” and “Clock” to  
“Ext-MIDI.  
4: Press the [PAGE] key to move to the “MIDI FILTER” page. Set “ProgChg” to “o,  
“CtrlChg” to “o, P.Bend” to “o.  
15  
16  
17  
18  
19  
20  
21  
[A]  
[B]  
[A]  
[B]  
Global Ch  
CC#8  
Global Ch  
CC#74  
CC#/Note  
Name  
Ch  
RADIAS  
OSC 1 Control2  
Global Ch  
CC#17  
LFO 1 Frequency  
Global Ch  
CC#90  
OSC 2 Tune  
Global Ch  
CC#21  
Amp Level  
Global Ch  
CC#7  
CC#/Note  
Name  
Ch  
KORG  
OSC1 Wave  
Global Ch  
CC#8  
Filter 1 Cut  
Global Ch  
CC#74  
Filter 1 Resonance  
Global Ch  
CC#71  
Filter 1 Balance  
Global Ch  
CC#27  
1: Connect the microSTATION’s MIDI OUT jack to the R3’s MIDI IN jack with a MIDI cable.  
2: Turn [PAGE SELECT] dial to move to “EDIT-P40 Global-A” page and set [KNOB4]’s  
“Position” to “Pre TG.”  
3: Turn [PAGE SELECT] dial to move to “EDIT-P42 MIDI” page and set [KNOB1]’s “MIDI  
Ch” to “01, [KNOB4]’s “Clock” to “Ext-MIDI.”  
4: Turn [PAGE SELECT] dial to move to “EDIT-P43 MIDIFilt” page and set [KNOB1]’s  
“PROG Chg” to “Enable,” [KNOB2]’s “Ctrl Chg” to “Enable, [KNOB3]’s “PitchBend” to  
“Enable.”  
CC#/Note  
Name  
Ch  
R3  
OSC 1 Control2  
Global Ch  
CC#17  
LFO 1 Frequency  
Global Ch  
CC#90  
OSC 2 Tune  
Global Ch  
CC#21  
Amp Level  
Global Ch  
CC#7  
CC#/Note  
Name  
Ch  
Track 1 Send  
Ch:01G  
Track 2 Send  
Ch:02  
Track 3 Send  
Ch:03  
Track 4 Send  
Ch:04  
[Send]  
[Pan]  
CC#/Note  
Name  
Ch  
CC#18  
CC#18  
CC#18  
CC#18  
Track 1 Pan  
Ch:01G  
Track 2 Pan  
Ch:02  
Track 3 Pan  
Ch:03  
Track 4 Pan  
Ch:04  
Load the “KORG microSTATION template.als” file.  
Select “Preferences...in the “Options” menu (or select “Preferences...” from the “Live”  
menu on the Mac) to open the “Preferences” dialog. Set “Input” of “Remote Control” to  
“microSTATION(KEYBOARD).  
Ableton  
Live  
CC#/Note  
Name  
Ch  
CC#10  
CC#10  
CC#10  
CC#10  
Track 1 Volume  
Ch:01G  
Track 2 Volume  
Ch:02  
Track 3 Volume  
Ch:03  
Track 4 Volume  
Ch:04  
[Volume]  
CC#/Note  
CC#7  
CC#7  
CC#7  
CC#7  
4
 
1: These operations will overwrite the previous MIDI Control settings. If necessary, back up the previous control Midi file.  
2: When the MIDI channel settings of the host application and the plug-in software are the same, proper control may not be available. Please change the MIDI channel setting on  
either the host application or the plug-in software. Please refer to the application’s manual for the correct setting  
Scene  
Variation  
Manufacturers  
Product Name  
Knob 1  
Knob 2  
Knob 3  
Knob 4  
HINT  
Mallet Stiffness  
soft/hard  
Mallet Force  
Name  
Mallet Noise pitch  
Mallet Noise decay  
strength  
Global Ch  
CC#45  
22  
23  
[A]  
[B]  
Ch  
Global Ch  
CC#44  
Global Ch  
CC#46  
Global Ch  
CC#47  
CC#/Note  
Lounge Lizard EP-3  
Select “Import...from the “File” menu and load the setting file “KORG Midi Links.lx3.  
Pickup Geometry  
Symmetry  
Pickup Geometry  
Distance  
Pickup Volume  
Input  
Pickup Volume Out-  
put  
Name  
Ch  
Global Ch  
CC#52  
Global Ch  
CC#53  
Global Ch  
CC#54  
Global Ch  
CC#55  
CC#/Note  
Name  
Ch  
OSC1 Detune  
Global Ch  
CC#44  
OSC1 PW  
Global Ch  
CC#45  
FILTER1 Cutoff  
Global Ch  
CC#46  
FILTER1 Q  
Global Ch  
CC#47  
24  
25  
26  
[A]  
[B]  
[A]  
CC#/Note  
Name  
Ch  
Select “Import...from the “File” menu and load the setting file “KORG Midi Links.axf”  
file.  
Ultra Analog VA  
FILTER1 ENV1 A  
Global Ch  
CC#52  
FILTER1 ENV1 D  
Global Ch  
CC#53  
FILTER1 ENV1 S  
Global Ch  
CC#54  
FILTER1 ENV1 R  
Global Ch  
CC#55  
Applied Acoustics  
Systems  
CC#/Note  
Name  
Ch  
Chorus Mix  
Global Ch  
CC#44  
Chorus Depth  
Global Ch  
CC#45  
Chorus Rate  
Global Ch  
CC#46  
Delay Mix  
Global Ch  
CC#47  
CC#/Note  
String Studio VS  
Select “Import...from the “File” menu and load the setting file “KORG Midi Links.sxf” file.  
Excitator Prot  
(Force, Mass)  
Excitator Stiff (Fric-  
tion)  
Name  
Excitator Velocity  
Filter Cutoff  
27  
[B]  
Ch  
Global Ch  
CC#102  
Global Ch  
CC#103  
Tune  
Global Ch  
CC#104  
Global Ch  
CC#105  
CC#/Note  
Name  
Ch  
Piano  
Tremolo Depth  
Global Ch  
CC#92  
Tremolo Speed  
Global Ch  
CC#79  
28  
29  
Lounge Lizard Session  
Ultra Analog Session  
Global Ch  
CC#71  
Global Ch  
CC#70  
Select “Import...from the “File” menu and load the setting file “KORG Midi Links.lls” file.  
CC#/Note  
Name  
Ch  
Keyboard Glide  
Global Ch  
CC#5  
Filter Cutoff  
Global Ch  
CC#74  
Filter Q  
Filter Env Attack  
Global Ch  
CC#85  
Select “Import...from the “File” menu and load the setting file “KORG Midi Links.uas”  
file.  
Global Ch  
CC#71  
CC#/Note  
5
 
1: These operations will overwrite the previous MIDI Control settings. If necessary, back up the previous control Midi file.  
2: When the MIDI channel settings of the host application and the plug-in software are the same, proper control may not be available. Please change the MIDI channel setting on  
either the host application or the plug-in software. Please refer to the application’s manual for the correct setting  
Scene  
Variation  
Manufacturers  
Product Name  
Knob 1  
Knob 2  
Knob 3  
Knob 4  
HINT  
Name  
Ch  
Wave Osc 1  
Wave Osc 2  
Wave Osc 3  
Cutoff  
30  
31  
32  
[A]  
[B]  
[A]  
Global Ch  
CC#16  
Global Ch  
CC#17  
Global Ch  
CC#18  
Global Ch  
CC#74  
Copy the setting file “controlMidi” into the following folder:  
Windows: The “save” folder is located inside the folder where minimoog V is installed.  
(e.g. C:\Program Files\Arturia\minimoog V\save)  
Mac: /Library/Preferences/minimoog V/save folder This operation will overwrite the  
previous MIDI Control settings. If necessary, back up the previous controlMidi file.  
CC#/Note  
Name  
Ch  
minimoog V  
Level Osc 1  
Global Ch  
CC#80  
Level Osc 2  
Global Ch  
CC#81  
Level Osc 3  
Global Ch  
CC#82  
Level Ext  
Global Ch  
CC#83  
CC#/Note  
Name  
Ch  
Attack Time Vca 1  
Global Ch  
CC#92  
Decay Time Vca 1  
Global Ch  
CC#94  
Sustain Level Vca 1  
Global Ch  
CC#95  
Release Time Vca 1  
Global Ch  
CC#96  
Copy the setting file “controlMidi” into the following folder:  
Windows: The “save” folder is located inside the folder where CS-80V is installed.  
(e.g. C:\Program Files\Arturia\CS-80V\save)  
Mac: /Library/Preferences/Cs80V/save folder. This operation will overwrite the previous  
MIDI Control settings. If necessary, back up the previous controlMidi file.  
CC#/Note  
CS-80V  
HighPass 1 Reso-  
nance  
LowPass 1 Reso-  
nance  
Name  
HighPass 1 Cutoff  
LowPass 1 Cutoff  
33  
34  
[B]  
[A]  
Ch  
Global Ch  
CC#65  
Global Ch  
CC#66  
Global Ch  
CC#67  
Global Ch  
CC#68  
CC#/Note  
Arturia  
Filter 1 Cutoff Fre-  
quency  
Filter 2 Cutoff Fre-  
quency  
Name  
Filter 1 Resonance  
Filter 2 Resonance  
Ch  
Global Ch  
Global Ch  
CC#16  
Global Ch  
CC#81  
Global Ch  
CC#17  
Copy the setting file “controlMidi” into the following folder:  
Windows: The “save” folder is located inside the folder where Moog Modular V is  
installed. (e.g. C:\Program Files\Arturia\Moog Modular V\save)  
Mac:/Library/Preferences/MoogModularV/save folder This operation will overwrite the  
previous MIDI Control settings. If necessary, back up the previous controlMidi file.  
CC#/Note  
Name  
Ch  
CC#80  
moog modular V  
125Hz Band Gain  
Global Ch  
350Hz Band Gain  
Global Ch  
CC#107  
1000Hz Band Gain  
Global Ch  
CC#108  
2800Hz Band Gain  
Global Ch  
CC#109  
35  
36  
[B]  
[A]  
CC#/Note  
Name  
Ch  
CC#106  
PORTAMENTO TIME  
Global Ch  
DELAY Dry/Wet  
Global Ch  
CC#45  
DELAY time L  
Global Ch  
CC#46  
DELAY time R  
Global Ch  
CC#47  
Copy the setting file “controlMidi” into the following folder:  
Windows: The “save” folder inside the folder where ARP2600 V is installed.  
(e.g. C:\Program Files\Arturia\ARP2600V\save)  
Mac: /Library/Preferences/arp2600v/save folder This operation will overwrite the previ-  
ous MIDI Control settings. If necessary, back up the previous controlMidi file.  
CC#/Note  
CC#44  
ARP2600 V  
INT.FIRTER FRE-  
QUENCY  
Name  
RESONANCE  
ADSR  
FILTER TYPE  
37  
[B]  
Ch  
Global Ch  
CC#52  
Global Ch  
CC#53  
Global Ch  
CC#54  
Global Ch  
CC#55  
CC#/Note  
6
 
1: These operations will overwrite the previous MIDI Control settings. If necessary, back up the previous control Midi file.  
2: When the MIDI channel settings of the host application and the plug-in software are the same, proper control may not be available. Please change the MIDI channel setting on  
either the host application or the plug-in software. Please refer to the application’s manual for the correct setting  
Scene  
Variation  
Manufacturers  
Product Name  
Knob 1  
Knob 2  
Knob 3  
Knob 4  
HINT  
Name  
Ch  
Osc A PW  
Filter Cutoff  
Filter Resonace  
Global Ch  
CC#71  
Filter Env Amount  
Global Ch  
CC#79  
38  
39  
40  
41  
42  
43  
44  
45  
[V]  
Global Ch  
CC#20  
Global Ch  
CC#74  
Copy the setting file “controlMidi” into the following folder:  
Windows: The “save” folder is located inside the folder where Prophet V is installed.  
(e.g. C:\Program Files\Arturia\ProphetV\save)  
Mac: /Library/Preferences/prophetv/save folder This operation will overwrite the previ-  
ous MIDI Control settings. If necessary, back up the previous controlMidi file.  
CC#/Note  
Name  
Ch  
Prophet V  
Filter Env Amount  
Global Ch  
CC#69  
Filter Cutoff  
Global Ch  
CC#30  
Filter Resonace  
Global Ch  
CC#68  
Volume  
[VS]  
[A]  
Global Ch  
CC#83  
CC#/Note  
Name  
Ch  
Arturia  
Level  
Cut Off  
Resonance  
Global Ch  
CC#71  
LFO Rate  
Global Ch  
CC#90  
Global Ch  
CC#7  
Global Ch  
CC#74  
Copy the setting file “midi.prefs” into the following folder:  
Windows: The “save” folder inside the folder where Analog Factory is installed. (e.g.  
C:\Program Files\Arturia\Analog Factory\save)  
Mac: /Library/Preferences/AnalogFactory folder This operation will overwrite the previ-  
ous MIDI Control settings. If necessary, back up the previous controlMidi file.  
CC#/Note  
Name  
Ch  
Analog Factory  
Param 1  
Global Ch  
CC#18  
Param 2  
Global Ch  
CC#19  
Param 3  
Global Ch  
CC#16  
Param 4  
Global Ch  
CC#17  
[B]  
CC#/Note  
Name  
Ch  
Pan  
Volume  
Free  
Free  
Apple  
GarageBand  
Global Ch  
CC#10  
Global Ch  
CC#7  
Global Ch  
off  
Global Ch  
off  
CC#/Note  
Name  
Ch  
Direct Master Level  
Global Ch  
CC#16  
Overhead Level  
Global Ch  
CC#17  
Room Level  
Global Ch  
CC#18  
PZM Level  
Global Ch  
CC#19  
[master]  
[trim]  
CC#/Note  
Name  
Ch  
Kick Trim  
Global Ch  
CC#52  
Snr Trim  
Global Ch  
CC#53  
HiH Trim  
Global Ch  
CC#54  
F Tom Trim  
Global Ch  
CC#55  
Click the “Load” icon (located in the upper right corner of the BFD window) to load the  
“BFD_KORG.bfd” file.  
Fxpansion  
BFD  
CC#/Note  
Name  
Ch  
Kick Tune  
Global Ch  
CC#44  
Snr Tune  
Global Ch  
CC#45  
HiH Tune  
Global Ch  
CC#46  
F Tom Tune  
Global Ch  
CC#47  
[tune]  
CC#/Note  
7
 
1: These operations will overwrite the previous MIDI Control settings. If necessary, back up the previous control Midi file.  
2: When the MIDI channel settings of the host application and the plug-in software are the same, proper control may not be available. Please change the MIDI channel setting on  
either the host application or the plug-in software. Please refer to the application’s manual for the correct setting  
Scene  
Variation  
Manufacturers  
Product Name  
Knob 1  
Knob 2  
Knob 3  
Knob 4  
HINT  
Name  
Ch  
Filter Frequency  
Global Ch  
CC#74  
Filter Q  
Filter Separation  
Global Ch  
CC#73  
Filter Amount  
Global Ch  
CC#52  
46  
47  
impOSCar  
Global Ch  
CC#71  
CC#/Note  
Name  
Ch  
Volume  
Tone  
Pitch  
Amp Env Attack  
Global Ch  
CC#73  
M-Tron  
Global Ch  
CC#7  
Global Ch  
CC#74  
Global Ch  
CC#95  
CC#/Note  
GMEDIA  
VCF Cutoff Fre-  
quency  
Name  
VCF Resonance  
HPF Cutoff Freq Q  
LFO Freq Q  
48  
Oddity  
Ch  
Global Ch  
CC#74  
Global Ch  
CC#71  
Global Ch  
CC#9  
Global Ch  
CC#8  
CC#/Note  
Name  
Ch  
Filter Emphasis  
Global Ch  
CC#71  
Filter Cutoff  
Global Ch  
CC#74  
Filter Contour  
Global Ch  
CC#70  
VCF Attack  
Global Ch  
CC#20  
For stand-alone operation Windows: Click the “SET UP” button in the lower right part of  
the “minimonsta” window to open the menu. Click on “Input device” and select “micro-  
STATION KEYBOARD. Mac: Click the “SET UP” in the lower right part of the “minimonsta”  
window to open the menu. Click on “Input device” and select “CoreMIDI.  
49  
50  
51  
minimonsta  
CC#/Note  
Name  
Ch  
Master Pan  
Global Ch  
CC#16  
FX1 Pan  
Global Ch  
CC#17  
FX2 Pan  
FX3 Pan  
Global Ch  
CC#19  
[Pan]  
Global Ch  
CC#18  
For stand-alone and plug-in synthesizer operation Select “MIDI settings” (located in the  
“OPTIONS” menu in the upper left corner of FL STUDIO window), and select “microSTA-  
TION 1 KEYBOARD. Select “Open” from the “FILE” menu, and load the “KORG microSTA-  
TION.flp” file.  
CC#/Note  
Name  
Ch  
Image-Line Software  
FL Studio  
Master Volume  
Global Ch  
CC#80  
FX1 Volume  
Global Ch  
CC#81  
FX2 Volume  
Global Ch  
CC#82  
FX3 Volume  
Global Ch  
CC#83  
[Volume]  
CC#/Note  
8
 
1: These operations will overwrite the previous MIDI Control settings. If necessary, back up the previous control Midi file.  
2: When the MIDI channel settings of the host application and the plug-in software are the same, proper control may not be available. Please change the MIDI channel setting on  
either the host application or the plug-in software. Please refer to the application’s manual for the correct setting  
Scene  
Variation  
Manufacturers  
Product Name  
Knob 1  
Knob 2  
Knob 3  
Knob 4  
HINT  
Name  
Ch  
Filter Cutoff  
Filter Resonance  
Global Ch  
CC#71  
Drive  
Transpose  
52  
53  
54  
MachFive  
Global Ch  
CC#74  
Global Ch  
CC#75  
Global Ch  
CC#76  
CC#/Note  
Name  
Ch  
Track 1 Pan  
Ch:01G  
Track 2 Pan  
Ch:02  
Track 3 Pan  
Ch:03  
Track 4 Pan  
Ch:04  
MOTU  
[Pan]  
CC#/Note  
Name  
Ch  
CC#10  
CC#10  
CC#10  
CC#10  
DP (Digital Performer)  
Select “Open...from the “File” menu and open the song file “DP_microSTATION.  
Track 1 Level  
Ch:01G  
Track 2 Level  
Ch:02  
Track 3 Level  
Ch:03  
Track 4 Level  
Ch:04  
[Level]  
CC#/Note  
CC#7  
CC#7  
CC#7  
CC#7  
PERCUSSION VOL-  
UME  
PERCUSSION  
DECAY  
Name  
VIBRATO MIX  
VIBRATO DEPTH  
55  
56  
57  
58  
[A]  
Ch  
Global Ch  
CC#70  
Global Ch  
CC#71  
Global Ch  
CC#73  
Global Ch  
CC#74  
CC#/Note  
B4  
UPPER MANUAL 5  
1/3'  
Name  
UPPER MANUAL 16'  
UPPER MANUAL 8'  
UPPER MANUAL 4'  
[B]  
[A]  
[B]  
Ch  
Global Ch  
CC#12  
Global Ch  
CC#13  
Global Ch  
CC#14  
Global Ch  
CC#15  
CC#/Note  
Native Instruments  
PERCUSSION VOL-  
UME  
PERCUSSION  
DECAY  
Name  
VIBRATO MIX  
VIBRATO DEPTH  
Ch  
Global Ch  
CC#70  
Global Ch  
CC#71  
Global Ch  
CC#73  
Global Ch  
CC#74  
CC#/Note  
B4 II  
Upper Drawbar 5 1/  
3'  
Name  
Upper Drawbar 16'  
Upper Drawbar 8'  
Upper Drawbar 4'  
Ch  
Global Ch  
CC#12  
Global Ch  
CC#13  
Global Ch  
CC#14  
Global Ch  
CC#15  
CC#/Note  
9
 
1: These operations will overwrite the previous MIDI Control settings. If necessary, back up the previous control Midi file.  
2: When the MIDI channel settings of the host application and the plug-in software are the same, proper control may not be available. Please change the MIDI channel setting on  
either the host application or the plug-in software. Please refer to the application’s manual for the correct setting  
Scene  
Variation  
Manufacturers  
Product Name  
Knob 1  
Knob 2  
Knob 3  
Knob 4  
HINT  
Name  
Ch  
Controller A  
Controller B  
Controller C  
Controller D  
Press the “OPTIONS” button and open the Preference dialog. Set the MIDI controllers as  
below.  
A: CC#0, B: CC#1, C: CC#2, D: CC#3, E: CC#4, F: CC#5, G: CC#6, H: CC#7  
59  
60  
Battery  
Global Ch  
CC#0  
Global Ch  
CC#1  
Global Ch  
CC#2  
Global Ch  
CC#3  
CC#/Note  
Sound Control  
Knob 1  
Sound Control  
Knob 2  
Sound Control  
Knob 3  
Sound Control  
Knob 4  
Name  
Press the “OPTIONS” button to open the “Settings” dialog. Confirm that “USE STD. CC#7  
/ CC#10 VOLUME & PAN” is active. In case it is not active, click it.  
Elektrik Piano  
Ch  
Global Ch  
CC#20  
Global Ch  
CC#21  
Global Ch  
CC#22  
Global Ch  
CC#23  
CC#/Note  
Easy Edit Timbre  
Brightness  
Easy Edit Timbre  
Harmonic  
Easy Edit Timbre  
Detune  
Easy Edit Timbre  
Env Amount  
Name  
61  
62  
[A]  
[B]  
Ch  
Global Ch  
CC#102  
Global Ch  
CC#103  
Global Ch  
CC#104  
Global Ch  
CC#105  
On the “MASTER” page, locate the “CONTROLLER DEFINE” parameters then press the  
“LOAD” button for “CONTROLLER ASSIGN” to load the setup file “KORG microSTA-  
TION.f7c.  
CC#/Note  
FM7  
Filter Envelope  
Amount  
Name  
Filter Cutoff  
Filter 1 Resonance  
Filter 1 Mode  
Native Instruments  
Ch  
Global Ch  
CC#111  
Global Ch  
CC#112  
Global Ch  
CC#113  
Global Ch  
CC#/Note  
Name  
Ch  
CC#110  
Timbre Harmonic  
Global Ch  
CC#83  
Timbre Detune  
Global Ch  
CC#20  
Timbre Brightness  
Global Ch  
CC#74  
Timbre Env Amount  
Global Ch  
63  
64  
[A]  
[B]  
On the “MASTER” page, locate the “MIDI Controller Assignment” parameters then press  
the “LOAD” button for “CONTROLLER ASSIGN” to load the setup file “KORG MIDI Assign-  
ment.f8c.  
CC#/Note  
Name  
Ch  
CC#79  
FM8  
LFO Rate  
LFO Vibrato  
Global Ch  
CC#103  
LFO Timbre  
Global Ch  
CC#104  
LFO Tremolo  
Global Ch  
Global Ch  
CC#90  
CC#/Note  
Name  
Ch  
CC#105  
Filter 1 Cutoff  
Global Ch  
Filter 1 Resonance  
Global Ch  
Filter 2 Cutoff  
Global Ch  
Filter 2 Resonance  
Global Ch  
1: Copy the setting file “KORG MIDI Setup.mca” into the following folder. Windows: The  
“mca” folder is located in the folder where the Massive is installed.  
(e.g. C:\Program Files\Native Instruments\Massive\mca)  
Mac: /Library/Application Support/Native Instruments/Massive/mca  
2: Select “Preference...in “Massive” menu to open “Massive Options. Double-Click  
“KORG MIDI Setup” in the “Midi Setups” of “Midi” page to turn it “on.  
65  
Massive  
CC#/Note  
CC#74  
CC#71  
CC#30  
CC#68  
10  
 
1: These operations will overwrite the previous MIDI Control settings. If necessary, back up the previous control Midi file.  
2: When the MIDI channel settings of the host application and the plug-in software are the same, proper control may not be available. Please change the MIDI channel setting on  
either the host application or the plug-in software. Please refer to the application’s manual for the correct setting  
Scene  
Variation  
Manufacturers  
Product Name  
Knob 1  
Knob 2  
Knob 3  
Knob 4  
HINT  
Oscillator A Pulse  
Width  
Oscillator B Pulse  
Width  
Name  
Filter Cutoff  
Filter Resonance  
Click the “NI” logo. Select “Load Controllermap” in the displayed menu and load  
“DefaultMap.txt” from the “Presets”-“Controller maps” folder inside the folder where  
PRO-53 is installed.  
66  
Native Instruments  
PRO-53  
Ch  
Global Ch  
CC#43  
Global Ch  
CC#55  
Global Ch  
CC#70  
Global Ch  
CC#71  
CC#/Note  
Name  
Ch  
Channel 1 Pan  
Global Ch  
CC#23  
Channel 2 Pan  
Global Ch  
CC#24  
Channel 3 Pan  
Global Ch  
CC#25  
Channel 4 Pan  
Global Ch  
CC#26  
67  
68  
69  
70  
71  
72  
[Pan]  
CC#/Note  
Name  
Ch  
Reason  
Channel 1 Level  
Global Ch  
CC#8  
Channel 2 Level  
Global Ch  
CC#9  
Channel 3 Level  
Global Ch  
CC#10  
Channel 4 Level  
Global Ch  
CC#12  
[Volume]  
CC#/Note  
Name  
Ch  
Filter Freq  
Global Ch  
CC#74  
Filter Res  
Global Ch  
CC#71  
Filter Mode  
Global Ch  
CC#76  
Filter Env Amount  
Global Ch  
CC#18  
Dr.Rex  
CC#/Note  
Name  
Ch  
Propellerhead  
OSC A motion  
Global Ch  
CC#92  
OSC A shift  
Global Ch  
CC#86  
Filter A res  
Global Ch  
CC#78  
Filter A Freq  
Global Ch  
CC#79  
Malstrom  
NN-19  
CC#/Note  
Name  
Ch  
Filter Freq  
Global Ch  
CC#74  
Filter Res  
Global Ch  
CC#71  
Filter Mode  
Global Ch  
CC#76  
Filter Env Attack  
Global Ch  
CC#14  
CC#/Note  
Name  
Ch  
Filter Freq  
Global Ch  
CC#74  
Filter Res  
Global Ch  
CC#71  
Amp Env Attack  
Global Ch  
CC#73  
Amp Env Decay  
Global Ch  
CC#9  
NN-XT  
CC#/Note  
11  
 
1: These operations will overwrite the previous MIDI Control settings. If necessary, back up the previous control Midi file.  
2: When the MIDI channel settings of the host application and the plug-in software are the same, proper control may not be available. Please change the MIDI channel setting on  
either the host application or the plug-in software. Please refer to the application’s manual for the correct setting  
Scene  
Variation  
Manufacturers  
Product Name  
Knob 1  
Knob 2  
Knob 3  
Knob 4  
HINT  
Name  
Ch  
Drum 1 Pan  
Drum 2 Pan  
Drum 3 Pan  
Drum 4 Pan  
73  
74  
75  
76  
77  
78  
79  
80  
[Pan]  
Global Ch  
CC#19  
Global Ch  
CC#20  
Global Ch  
CC#21  
Global Ch  
CC#22  
CC#/Note  
Name  
Ch  
Drum 1 Level  
Global Ch  
CC#8  
Drum 2 Level  
Global Ch  
CC#9  
Drum 3 Level  
Global Ch  
CC#10  
Drum 4 Level  
Global Ch  
CC#12  
ReDrum  
[Level]  
[Pitch]  
CC#/Note  
Name  
Ch  
Propellerhead  
Drum 1 Pitch  
Global Ch  
CC#51  
Drum 2 Pitch  
Global Ch  
CC#52  
Drum 3 Pitch  
Global Ch  
CC#53  
Drum 4 Pitch  
Global Ch  
CC#54  
CC#/Note  
Name  
Ch  
OSC 1 Phase  
Global Ch  
CC#93  
OSC 2 Phase  
Global Ch  
CC#106  
FM  
MIX  
Subtractor  
Global Ch  
CC#108  
Global Ch  
CC#107  
CC#/Note  
Name  
Ch  
Layer A Pan  
Global Ch  
CC#83  
Layer A Level  
Global Ch  
CC#81  
Layer B Pan  
Global Ch  
CC#84  
Layer B Level  
Global Ch  
CC#82  
Atmosphere  
CC#/Note  
Name  
Ch  
FILTER LFOS RATE  
Global Ch  
CC#16  
FILTER LFOS DEPTH  
Global Ch  
CC#17  
FILTER LFOS WAVE  
Global Ch  
CC#18  
CHAOS DOWN/UP  
Global Ch  
CC#19  
[A]  
[B]  
CC#/Note  
Name  
Ch  
Spectrasonics  
Stylus RMX  
Load the “StylusRMX_KORG.mlt_rmx” as the MIDI Learn set file.  
CHAOS PATTERN  
Global Ch  
CC#80  
CHAOS REPEAT  
Global Ch  
CC#81  
CHAOS REVERSE  
Global Ch  
CC#82  
SAMPLE START  
Global Ch  
CC#83  
CC#/Note  
Name  
Ch  
Layer A Pan  
Global Ch  
CC#83  
Layer A Level  
Global Ch  
CC#81  
Layer B Pan  
Global Ch  
CC#84  
Layer B Level  
Global Ch  
CC#82  
Trilogy  
CC#/Note  
12  
 
1: These operations will overwrite the previous MIDI Control settings. If necessary, back up the previous control Midi file.  
2: When the MIDI channel settings of the host application and the plug-in software are the same, proper control may not be available. Please change the MIDI channel setting on  
either the host application or the plug-in software. Please refer to the application’s manual for the correct setting  
Scene  
Variation  
Manufacturers  
Product Name  
Knob 1  
Knob 2  
Knob 3  
Knob 4  
HINT  
Name  
Ch  
Audio Pan1  
Audio Pan2  
Audio Pan3  
Audio Pan4  
81  
82  
83  
84  
85  
86  
87  
88  
[Audio Pan]  
Ch:01G  
Ch:02  
Ch:03  
Ch:04  
CC#/Note  
Name  
Ch  
CC#10  
CC#10  
CC#10  
CC#10  
Audio Level 1  
Ch:01G  
Audio Level 2  
Ch:02  
Audio Level 3  
Ch:03  
Audio Level 4  
Ch:04  
First, you need to install the KORG USB/MIDI driver.  
[Audio Level]  
[MIDI Pan]  
1: Select “Device Setup...” from the “Devices” menu and open the “Device setup” dialog.  
Select “Generic Remote” from the “Devices” list in the left column. Select “keyboard”  
for the “MIDI input” and press the “Import” button. Load “Cubase_KORG.xmll. (If you  
do not find “Generic Remote” in the left column, please add it using the “Add/  
Remove” function.)  
CC#/Note  
Name  
Ch  
CC#7  
CC#7  
CC#7  
CC#7  
Cubase  
MIDI Pan1  
Ch:01G  
MIDI Pan2  
Ch:02  
MIDI Pan3  
Ch:03  
MIDI Pan4  
Ch:04  
2: Press the “Apply” button.  
CC#/Note  
Name  
Ch  
CC#41  
CC#41  
CC#41  
CC#41  
MIDI Level 1  
Ch:01G  
MIDI Level 2  
Ch:02  
MIDI Level 3  
Ch:03  
MIDI Level 4  
Ch:04  
[MIDI Level]  
CC#/Note  
Name  
Ch  
CC#35  
CC#35  
CC#35  
CC#35  
Steinberg  
Oscillator 1 FM  
Global Ch  
CC#77  
Filter Cutoff  
Global Ch  
CC#74  
Filter Resonance  
Global Ch  
CC#71  
Filter Drive  
Global Ch  
CC#29  
A1  
CC#/Note  
Name  
Ch  
OSC1 DEPTH  
Global Ch  
CC#103  
OSC2 PWM  
Global Ch  
CC#19  
OSC2 DEPTH  
Global Ch  
CC#105  
FX OVER DRIVE  
Global Ch  
CC#70  
Monologue  
Tonic  
CC#/Note  
Name  
Ch  
ENV MOD ATTACK  
Global Ch  
CC#73  
ENV MOD RELEASE  
Global Ch  
CC#72  
RES  
CUTOFF  
Global Ch  
CC#74  
Global Ch  
CC#71  
CC#/Note  
Name  
Ch  
OSC1 WAVE  
Global Ch  
CC#9  
OSC1 TONE  
Global Ch  
CC#74  
OSC1 WIDTH  
Global Ch  
CC#16  
OSC2 WAVE  
Global Ch  
CC#14  
Embracer  
CC#/Note  
13  
 
1: These operations will overwrite the previous MIDI Control settings. If necessary, back up the previous control Midi file.  
2: When the MIDI channel settings of the host application and the plug-in software are the same, proper control may not be available. Please change the MIDI channel setting on  
either the host application or the plug-in software. Please refer to the application’s manual for the correct setting  
Scene  
Variation  
Manufacturers  
Product Name  
Knob 1  
Knob 2  
Knob 3  
Knob 4  
HINT  
Name  
Ch  
Kick Volume  
Snare Volume  
Ch:02  
Tom Volume  
Ch:03  
Hi-Hat Volume  
Ch:04  
In the host application, change the MIDI output channel for the MIDI track you want to  
use “Groove Agent” on to “ANY” or other multi-channel outputs.  
89  
90  
Groove Agent  
Ch:01G  
CC#/Note  
Name  
Ch  
CC#73  
CC#73  
CC#73  
CC#73  
DCF CUTOFF  
Global Ch  
CC#74  
DCF RESONANCE  
Global Ch  
CC#71  
DCF VELOCITY  
Global Ch  
CC#15  
DCF ENV. AMOUNT  
Global Ch  
CC#80  
Enable “RECEIVE MIDI CONTROLLER” in “KEY/CONTROL OPTION” of the “OPTIONS”  
page.  
HALion  
CC#/Note  
Steinberg  
GM Edit: filt env  
dec+rel  
Name  
GM Edit: cutoff  
GM Edit: resonance  
GM Edit: filt env att  
91  
Hypersonic  
Ch  
Global Ch  
CC#74  
Global Ch  
CC#71  
Global Ch  
CC#77  
Global Ch  
CC#78  
CC#/Note  
Name  
Ch  
Shuffle  
Global Ch  
CC#76  
Dynamics  
Global Ch  
CC#79  
Timing  
Decay  
92  
93  
94  
95  
96  
Virtual Guitarist  
Global Ch  
CC#78  
Global Ch  
CC#75  
CC#/Note  
Name  
Ch  
Osc 1 Pitch  
Global Ch  
CC#13  
Osc 1 Level  
Global Ch  
CC#28  
Osc 2 Pitch  
Global Ch  
CC#22  
Osc 2 Level  
Global Ch  
CC#30  
In the host application, change the MIDI output channel for the MIDI track on which  
“Attack” is used for each of the sounds that you want to remote-control such as kick,  
snare, drum, etc.  
Attack  
CC#/Note  
Name  
Ch  
Waldorf  
BASIS  
VCF-CUTOFF  
Global Ch  
CC#74  
VCF-EMPHASIS  
Global Ch  
CC#71  
ENV1>VCF  
Global Ch  
CC#28  
PPG Wave 2.V  
Global Ch  
CC#8  
CC#/Note  
Name  
Ch  
Free  
Free  
Free  
Free  
dfh  
Global Ch  
Off  
Global Ch  
Off  
Global Ch  
Off  
Global Ch  
Off  
CC#/Note  
Name  
Ch  
ToonTrack  
Free  
Free  
Free  
Free  
EZ Drummer  
Global Ch  
Off  
Global Ch  
Off  
Global Ch  
Off  
Global Ch  
Off  
CC#/Note  
14  
 
1: These operations will overwrite the previous MIDI Control settings. If necessary, back up the previous control Midi file.  
2: When the MIDI channel settings of the host application and the plug-in software are the same, proper control may not be available. Please change the MIDI channel setting on  
either the host application or the plug-in software. Please refer to the application’s manual for the correct setting  
Scene  
Variation  
Manufacturers  
Product Name  
Knob 1  
Knob 2  
Knob 3  
Knob 4  
HINT  
Name  
Ch  
Timbre 1 Pan  
Ch:01G  
Timbre 2 Pan  
Ch:02  
Timbre 3 Pan  
Ch:03  
Timbre 4 Pan  
Ch:04  
97  
98  
[Pan]  
CC#/Note  
Name  
Ch  
CC#10  
CC#10  
CC#10  
CC#10  
PLUGSOUND PRO  
Timbre 1 Volume  
Ch:01G  
Timbre 2 Volume  
Ch:02  
Timbre 3 Volume  
Ch:03  
Timbre 4 Volume  
Ch:04  
[Volume]  
CC#/Note  
CC#7  
CC#7  
CC#7  
CC#7  
Master filter reso-  
nance  
Name  
Filter Cutoff  
Filter Resonance  
Master filter cutoff  
99  
Charlie  
Ch  
Global Ch  
CC#77  
Global Ch  
CC#78  
Global Ch  
CC#74  
Global Ch  
CC#71  
UltimateSoundBank  
CC#/Note  
Master filter cut fre-  
quency  
Master filter reso-  
nance  
Name  
Filter Cutoff  
Filter Resonance  
100  
101  
Ultra Focus  
X-treme FX  
Ch  
Global Ch  
CC#77  
Global Ch  
CC#78  
Global Ch  
CC#74  
Global Ch  
CC#71  
CC#/Note  
Master filter cut fre-  
quency  
Master filter reso-  
nance  
Name  
Filter Cutoff  
Filter Resonance  
Ch  
Global Ch  
CC#77  
Global Ch  
CC#78  
Global Ch  
CC#74  
Global Ch  
CC#71  
CC#/Note  
Manufacturer Name  
KORG: These product names are the trademark or a registered trademarks of KORG Inc.  
Ableton: This product name is a trademark or a registered trademark of Ableton AG.  
Applied Acoustics Systems: These product names are the trademark or a registered trademarks of Applied  
Acoustics Systems DVM Inc.  
Propellerhead: These product names are the trademark or a registered trademarks of Propellerhead Software AB.  
Spectrasonics: These product names are the trademark or a registered trademarks of Spectrasonics.  
Steinberg: These product names are the trademark or a registered trademarks of Steinberg Media Technologies  
GmbH.  
Arturia: These product names are the trademark or a registered trademarks of Arturia.  
Apple: This product name is a trademark or a registered trademark of Apple Inc.  
Fxpansion: This product name is a trademark or a registered trademark of FXpansion Audio UK Ltd.  
GMEDIA: These product names are the trademark or a registered trademarks of GMEDIA Music.  
ImageLine Software: This product name is a trademark or a registered trademark of ImageLine Software.  
MOTU: These product names are the trademark or a registered trademarks of MOTU, Inc.  
Native Instruments: These product names are the trademark or a registered trademarks of Native Instruments  
GmbH.  
Waldorf and the Waldorf Logo are registered trademarks of Waldorf Music GmbH.  
ToonTrack: These product names are the trademark or a registered trademarks of Toontrack Music AB.  
UltimateSoundBank: These product names are the trademark or a registered trademarks of Univers Sons, SA.  
15  
 
IMPORTANT NOTICE TO CONSUMERS  
This product has been manufactured according to strict specifications and voltage  
requirements that are applicable in the country in which it is intended that this product should  
be used. If you have purchased this product via the internet, through mail order, and/or via a  
telephone sale, you must verify that this product is intended to be used in the country in  
which you reside.  
WARNING: Use of this product in any country other than that for which it is intended could  
be dangerous and could invalidate the manufacturers or distributors warranty.  
Please also retain your receipt as proof of purchase otherwise your product may be  
disqualified from the manufacturers or distributors warranty.  
4015-2 Yanokuchi, Inagi-city, Tokyo 206-0812 Japan  
© 2010 KORG INC.  
 

iOptron Telescope G MC90 User Manual
JVC Cassette Player MX KC45 User Manual
JVC MP3 Player XA A55CL User Manual
Karcher Pressure Washer K 2900M User Manual
Kenmore Vacuum Cleaner 11630612 User Manual
KitchenAid Range 2175674 User Manual
KitchenAid Ventilation Hood KHLU182MSS1 User Manual
Klipsch Speaker RF 82 User Manual
Kompernass Speaker System KH 2265 User Manual
Konica Minolta All in One Printer 160f User Manual